1 Water-oil moisture inlet
2 Noise-shock absorber
3 First separating chamber
4 Second separating chamber
5 Active coal filters
6 Level indicators
7 Purified water outlet
8 Oil outlet
9 Control panel


They are of universal use. They can be connected with every type of
compressors, tanks, dryers, coolers and pneumatic machineries.
No pumps and therefore no pressure.
They only need 10 W/h to feed the electrovalves when draining off water.
Easy to install.
Chemical aggressive moisture resistant. The cover is in PVC and the other components are of stainless materials.
They reduce at least the use and the maintenance of active coal filters.
The residual oil is widely within the limit imposed by the
law of advanced countries.
 
The water can be discharged at any time as the ECO DRAIN 2000 is permanently connected to the pneumatic circuit
and directly flows into the drainpipe.
Small sizes.
   
They are cheap.
FEATURES AND PERFORMANCESa
Voltage
220V-50/60Hz
Absorbed power
10W/h
Highest depuration capacity of moisture
25l/h of liquid
30.000Nl/min of air
Overall dimensions
705x470x420mm
Suggested location on the ground level
300÷500mm
Highest residual oil in the water
0,004g/l